The wood has natural properties that will assist it withstand the weather but to make it final even longer we apply a ‘colour harmonising’ end within the factory, which contains a preservative. We then apply a micro-porous protective stain or paint finish.

Common Cleaning – perform regularly no less than twice a yr
For normal cleaning use a soft cloth and water with cleaning soap or washing-up liquid
To remove grease marks, use washing-up liquid with little or no water then rinse with clean water
Don’t use glass cleaner on frames
Don’t use kitchen / rest room cleaners
Wood is not indestructible. Maintenance of the coated end is essential, not only to keep the window or door looking good, however with the proper upkeep your products should final even longer than their guarantees.

To Recoat
It is recommended that the surface coating is inspected annually and if required it’s best to re-coat the wood with micro-porous stain or paint.

Right here’s how:

Clean the window or door as above and let it dry fully
Use a fine grade of wet and dry silicon carbide abrasive paper to lightly rub down the prevailing paint or stain finish (do not try to rub through the present coat. This train is meant only to remove any grease and filth and provide a smooth surface)
Remove all dust and debris with a wet cloth, taking care to keep away from inhalation of the mud
Allow to dry completely
Apply the micro-porous end with a brush, taking care to not overload the brush or get the finish on the seals or gaskets
Only use micro-porous paint or stain. Avoid non-micro-porous finishes similar to yacht varnish as they want stripping and renewing more often. And you must observe the directions on the container carefully.
Scratches and Chips
Damaged timber should be re-painted or re-stained immediately
First, put together the damaged space by removing all surface damage with a light abrasive following the line of the grain
Remove all dust and particles with a wet cloth, taking care to avoid inhaling the dust
The place obligatory, a timber filler may be used to repair the damage and provide a smooth surface for reapplying the end
Re-apply the end to the damaged area as described above
Failure to deal with scratches and chips will invalidate the product guarantee.

Knots, Grain and Movement
Wood is a natural product and features corresponding to knots and differences in grain appearance do occur. This will not be a fault but part of the natural great thing about our timber product. As a natural product some degree of movement in terms of growth or contraction might be expected..

In case you loved this short article and you would love to receive details regarding Traditional Timber Windows generously visit our own web-page.