The wood has natural properties that can assist it withstand the elements however to make it last even longer we apply a ‘colour harmonising’ end in the factory, which accommodates a preservative. We then apply a micro-porous protective stain or paint finish.
General Cleaning – carry out recurrently a minimum of twice a yr
For basic cleaning use a soft material and water with soap or washing-up liquid
To remove grease marks, use washing-up liquid with little or no water then rinse with clean water
Do not use glass cleaner on frames
Don’t use kitchen / bathroom cleaners
Wood shouldn’t be indestructible. Maintenance of the coated end is important, not only to keep the window or door looking good, but with the right upkeep your products ought to final even longer than their guarantees.
It is recommended that the surface coating is inspected yearly and if required you must re-coat the wood with micro-porous stain or paint.
Right here’s how:
Clean the window or door as above and let it dry utterly
Use a fine grade of wet and dry silicon carbide abrasive paper to lightly rub down the prevailing paint or stain end (do not try to rub by the present coat. This exercise is meant only to remove any grease and dirt and provide a smooth surface)
Remove all mud and particles with a wet material, taking care to avoid inhalation of the mud
Allow to dry completely
Apply the micro-porous end with a brush, taking care to not overload the brush or get the end on the seals or gaskets
Only use micro-porous paint or stain. Keep away from non-micro-porous finishes equivalent to yacht varnish as they want stripping and renewing more often. And you need to follow the instructions on the container carefully.
Scratches and Chips
Damaged timber ought to be re-painted or re-stained instantly
First, prepare the damaged space by removing all surface damage with a light abrasive following the line of the grain
Remove all dust and debris with a wet cloth, taking care to avoid inhaling the dust
The place crucial, a timber filler may be used to repair the damage and provide a smooth surface for reapplying the end
Re-apply the finish to the damaged area as described above
Failure to deal with scratches and chips will invalidate the product guarantee.
Knots, Grain and Movement
Wood is a natural product and options similar to knots and differences in grain look do occur. This is not a fault however part of the natural fantastic thing about our timber product. As a natural product some degree of movement when it comes to growth or contraction may be expected..
If you have any kind of issues about in which as well as how you can use Traditional Timber Windows, it is possible to email us in our own web-page.