The wood has natural properties that will assist it withstand the elements however to make it final even longer we apply a ‘colour harmonising’ finish in the factory, which comprises a preservative. We then apply a micro-porous protective stain or paint finish.

Common Cleaning – perform frequently at the least twice a year
For normal cleaning use a soft material and water with cleaning soap or washing-up liquid
To remove grease marks, use washing-up liquid with little or no water then rinse with clean water
Don’t use glass cleaner on frames
Don’t use kitchen / toilet cleaners
Wood just isn’t indestructible. Maintenance of the coated finish is essential, not only to keep the window or door looking good, however with the correct upkeep your products ought to last even longer than their guarantees.

To Recoat
It is strongly recommended that the surface coating is inspected annually and if required you need to re-coat the wood with micro-porous stain or paint.

Right here’s how:

Clean the window or door as above and let it dry fully
Use a fine grade of wet and dry silicon carbide abrasive paper to lightly rub down the present paint or stain finish (don’t attempt to rub through the prevailing coat. This exercise is meant only to remove any grease and grime and provide a smooth surface)
Remove all mud and particles with a wet material, taking care to keep away from inhalation of the dust
Allow to dry totally
Apply the micro-porous finish with a brush, taking care to not overload the brush or get the end on the seals or gaskets
Only use micro-porous paint or stain. Keep away from non-micro-porous finishes similar to yacht varnish as they need stripping and renewing more often. And you need to observe the instructions on the container carefully.
Scratches and Chips
Damaged timber needs to be re-painted or re-stained immediately
First, prepare the damaged area by removing all surface damage with a light abrasive following the line of the grain
Remove all mud and debris with a wet fabric, taking care to keep away from inhaling the mud
The place obligatory, a timber filler may be used to repair the damage and provide a smooth surface for reapplying the finish
Re-apply the end to the damaged space as described above
Failure to treat scratches and chips will invalidate the product guarantee.

Knots, Grain and Movement
Wood is a natural product and options equivalent to knots and variations in grain appearance do occur. This is not a fault but a part of the natural fantastic thing about our timber product. As a natural product some degree of movement when it comes to expansion or contraction might be expected..

In case you liked this information as well as you would want to obtain more details regarding Traditional Timber Windows kindly stop by the web site.